Waddabich [NUDITY]

Show your work to the world!
Post Reply
moontan
Beta Tester
Posts: 136
Joined: Fri Sep 18, 2009 4:37 pm
Full Name: Mark Tanner
Company/Affiliation: Motion Mogul
Job Title/Position: Creative Director

Waddabich [NUDITY]

Post by moontan »

Well I think I have figured out what not to do.
Now if I can just figure out what to do.

Here is a simple animation that shows what the sim can do.
Avatar.flv
(551.95 KiB) Downloaded 26788 times
avatar.jpg
avatar.jpg (9.91 KiB) Viewed 27333 times
cem
Site Admin
Posts: 3755
Joined: Wed Apr 29, 2009 11:40 pm
Full Name: Cem Yuksel
Company/Affiliation: Cyber Radiance
Job Title/Position: Owner
Contact:

Re: Waddabich

Post by cem »

Wow! This is very impressive! :ok:
Cem Yuksel - Developer
anishmations
Beta Tester
Posts: 428
Joined: Mon Oct 26, 2009 9:38 pm
Full Name: Anish Mohan
Company/Affiliation: FAT BALLOON ANIMATIONS
Job Title/Position: 3d Art Lead
Location: India
Contact:

Re: Waddabich

Post by anishmations »

WOW!!!!
moontan wrote:Well I think I have figured out what not to do.
TUTORIAL TIME!!!
______________________________________

http://www.anishmations.com/gallery.htm
3DTutorial
Beta Tester
Posts: 64
Joined: Sun Sep 20, 2009 11:31 am
Full Name: Joseph Richard Saltzman
Company/Affiliation: 3DTutorial.com
Job Title/Position: Director
Location: New Jersey, USA

Re: Waddabich

Post by 3DTutorial »

anishmations wrote:WOW!!!!
moontan wrote:Well I think I have figured out what not to do.
TUTORIAL TIME!!!

Yes, please! A tutorial would be brilliant. Awesome work!

Regards,

J
Joseph R Saltzman
Managing Director
3DTutorial.com
moontan
Beta Tester
Posts: 136
Joined: Fri Sep 18, 2009 4:37 pm
Full Name: Mark Tanner
Company/Affiliation: Motion Mogul
Job Title/Position: Creative Director

Re: Waddabich

Post by moontan »

Hell I'm a slow learner, let alone a teacher.
But there is a challenge there.

I'll see if I can do something.
In the meantime.... read the instructions. Cem did a pretty good job on them. They are priceless.
3DTutorial
Beta Tester
Posts: 64
Joined: Sun Sep 20, 2009 11:31 am
Full Name: Joseph Richard Saltzman
Company/Affiliation: 3DTutorial.com
Job Title/Position: Director
Location: New Jersey, USA

Re: Waddabich

Post by 3DTutorial »

moontan wrote:Hell I'm a slow learner, let alone a teacher.
But there is a challenge there.

I'll see if I can do something.
In the meantime.... read the instructions. Cem did a pretty good job on them. They are priceless.

Hey, that's fair enough mate. I just thought you might have cooked up some special technique other than what is explained in the docs. In any case, great stuff!

Cheers,

J
Joseph R Saltzman
Managing Director
3DTutorial.com
moontan
Beta Tester
Posts: 136
Joined: Fri Sep 18, 2009 4:37 pm
Full Name: Mark Tanner
Company/Affiliation: Motion Mogul
Job Title/Position: Creative Director

Re: Waddabich

Post by moontan »

There is one trick that worked well.
Cem stated in the thread viewtopic.php?f=13&t=511&start=0

That making copies of the hairstyle then breaking up the hairstyle into several smaller hairstyles by deleting different parts from each of the copies and simming each seperately.

I originally used just one of the four different hair sections to dial in the sim. Then I copied it to the other sections and simmed each one seperately. On my machine i was able to sim 3 different instances of max running at the same time. Each of the sims took about 20 minutes. So that was only 20 minutes plus the fourth sim 20 minutes to get it simmed in 40 miuntes. I also did a test with the whole hairstyle with the same sim on it. it took 6 hours.
So breaking it down onto smaller hair sections to sim really helped.

After the simming was done I saved the files numbered progressively. Then opened the first and started to merge each of the simmed sections back in.

Then add salt and simmer for 2-3 hours
anishmations
Beta Tester
Posts: 428
Joined: Mon Oct 26, 2009 9:38 pm
Full Name: Anish Mohan
Company/Affiliation: FAT BALLOON ANIMATIONS
Job Title/Position: 3d Art Lead
Location: India
Contact:

Re: Waddabich

Post by anishmations »

thanks moontan!
Can you please put up the video of hairmesh in simulation?
______________________________________

http://www.anishmations.com/gallery.htm
moontan
Beta Tester
Posts: 136
Joined: Fri Sep 18, 2009 4:37 pm
Full Name: Mark Tanner
Company/Affiliation: Motion Mogul
Job Title/Position: Creative Director

Re: Waddabich

Post by moontan »

Anishmation,
I will do that. But it will be later tonight or tomorrow when I get back home.
But as soon a I can I will.

I think it might be helpful to see, because it sometimes looks like it is all going to hell during the simulation.
moontan
Beta Tester
Posts: 136
Joined: Fri Sep 18, 2009 4:37 pm
Full Name: Mark Tanner
Company/Affiliation: Motion Mogul
Job Title/Position: Creative Director

Re: Waddabich

Post by moontan »

Here is a shot of the layers used for the simming.

And the animation of the sim
Attachments
HairMeshes.jpg
HairMeshes.jpg (330.64 KiB) Viewed 29538 times
Sim.flv
(730.56 KiB) Downloaded 26681 times
anishmations
Beta Tester
Posts: 428
Joined: Mon Oct 26, 2009 9:38 pm
Full Name: Anish Mohan
Company/Affiliation: FAT BALLOON ANIMATIONS
Job Title/Position: 3d Art Lead
Location: India
Contact:

Re: Waddabich

Post by anishmations »

thats awesome!
thanks ! u kept ur promise :ok:
______________________________________

http://www.anishmations.com/gallery.htm
Elendil
Beta Tester
Posts: 52
Joined: Thu Oct 08, 2009 7:33 am
Full Name: Nicolas Boyer
Job Title/Position: Ingénieur

Re: Waddabich

Post by Elendil »

Yeah this is an impressive job man :)
Infinite
Beta Tester
Posts: 395
Joined: Thu Apr 30, 2009 10:52 am
Full Name: Lee Perry-Smith
Contact:

Re: Waddabich

Post by Infinite »

Wow some very impressive work there. Very inspiring to see :D
Lee Perry-Smith -Beta Tester

www.ir-ltd.net

triplegangers (3D Scans and Digital Captures)
Kuroe
Posts: 21
Joined: Fri Jul 09, 2010 1:23 pm
Full Name: Eric Lin

Re: Waddabich (NUDITY)

Post by Kuroe »

this is wonderful!
I tried bunch of sim and none of it as good as this, do you mind to share with us your settings?

somehow when I simulate the hair start going through the collision objects.. even if I turn up the subdiv a bit.
moontan
Beta Tester
Posts: 136
Joined: Fri Sep 18, 2009 4:37 pm
Full Name: Mark Tanner
Company/Affiliation: Motion Mogul
Job Title/Position: Creative Director

Re: Waddabich (NUDITY)

Post by moontan »

I will if I can. This was done back in December with Max 9. Right now when I open it in 2010 it crashes.

I will see what I can do to get it opened. If not it is way past time to do another.
Post Reply